Cisterna no para de echar agua

Mario Vaquero


If you have noticed that your toilet tank keeps on refilling and water is constantly running, it can be quite frustrating and wasteful. Fortunately, there are a few common reasons why this might be happening, and some simple steps you can take to fix it yourself.

Check the Flapper Valve

If you lift the lid of your toilet tank and see that the water is constantly running, it is likely that the flapper valve is not sealing properly. The flapper valve is the rubber piece that covers the opening at the bottom of the tank. Over time, it can become worn or misaligned, causing a small leak. To fix this, turn off the water supply to the toilet, drain the tank, and replace the flapper valve with a new one.

Inspect the Fill Valve

If replacing the flapper valve doesn’t stop the water from running, the issue may lie with the fill valve. The fill valve is responsible for refilling the tank after each flush. Sometimes, the fill valve can become stuck, causing it to continuously release water. Try flushing the toilet a few times to see if this releases the valve. If not, you may need to adjust or replace the fill valve.

Check the Float

If the water level in your toilet tank is too high, it can cause continuous running. The float, which is a small plastic or metal device, is responsible for controlling the water level. If the float is set too high, it may not properly shut off the water flow. Adjust the float so that it is at the correct height, typically around 1 inch below the overflow tube.

Quizás también te interese:  Cómo abrir caja fuerte de los chinos sin llave

By checking and addressing these common issues with your toilet tank, you can save yourself from wasting water and potentially reduce your water bill. If you’re unsure about any of the steps or if the problem persists, it is best to consult a professional plumber.

Have you experienced a constantly running toilet? Share your thoughts and experiences in the comments below!

Deja un comentario